Making precision sheet metal, how to reduce the wear degree in the process of sheet metal processing? In order to reduce the loss and cost, many manufacturers will pay attention to the problem of "reducing the wear in the process of sheet metal processing". So, how should we reduce the wear degree in the process of sheet metal processing?

1. The warning light is closed and turned on during use.

2. The sliding window is more than one meter wide or double-layer glass doors and windows with a double pulley.

3. The metal stamping parts shall be regularly maintained after rust and corrosion are avoided.

4. The door lock handle of the window frame door is assembled. To ensure the correctness, the switch should be sensitive to the direction.

5. It is necessary to install the fastening screws in the metal lining. The thickness of the lining is greater than that of the hardware in the fastener court twice.

6. In the process of sheet metal processing, the composite national standard hardware should be selected and matched with PVC doors and windows.